Installation
🛠️ SpeedMaster 365 Installation Guide
Unleash the Full Power of Your Electric Scooter
⚠️ This kit is intended for use only in private or controlled environments (such as closed tracks or private roads).
📦 What’s in the Box?
Your SpeedMaster 365 kit includes the following components:
| # | Component | Description |
|---|---|---|
| 1 | Controller | The heart of the kit, manages power and communication |
| 2 | Dashboard Cover | Protective casing for the display |
| 3 | Dashboard (Display Unit) | Shows speed, battery level, and riding mode |
| 4 | Communication Cable | Links the controller to the dashboard |
| 5 | Battery Adapter | Connects battery to new controller |
| 6 | Xiaomi Engine Adapter | Compatible with Xiaomi scooter motors |
| 7 | Hall Sensor Adapter 1 | Connects motor position sensors |
| 8 | Hall Sensor Adapter 2 | Alternate connection option |
| 9 | Brake Light Adapter | Connects rear brake indicator light |
| 10 | Xiaomi Accelerator/Brake/Headlight Adapter | Full system integration cable |
🔧 Installation Steps (10-Step Guide)
Step 1 – Remove Battery Cover
Unscrew the bolts and lift off the bottom battery cover.
Step 2 – Disconnect the Battery Cable
Always unplug the battery first to ensure safety.
Step 3 – Unplug Controller Cables
Carefully remove all connected wires from the existing controller.
Step 4 – Remove the Original Controller
Unscrew and remove the factory controller.
Step 5 – Mount the SpeedMaster 365 Controller
Install the new controller using the same screw holes and bolts as the original.
Step 6 – Remove the Dashboard
On the handlebar, unclip the dashboard cover, unscrew the board, and unplug the four connecting wires.
Step 7 – Replace the Communication Cable
Feed the new cable down through the scooter’s steering column to replace the original one.
Step 8 – Connect All Wires to the New Controller
Attach all relevant wires to the new controller. Connect the battery cable last.
Step 9 – Plug in the New Dashboard
Attach the new display by connecting it to the matching cable ports.
Step 10 – Finalize the Installation
Screw the dashboard back into place and clip on the cover. You’re done!
